Lowongan Kerja Quality Inspector McDermott Batam 2026
McDermott BatamRekrutmen McDermott 2026 - McDermott tengah membuka peluang karir untuk Anda melalui Lowongan Kerja Terbaru guna mengisi posisi jabatan sebagai Quality Inspector yang akan ditempatkan di Batam. Silakan baca keterangan lowongan kerja selengkapnya di bawah ini :
Lowongan Kerja McDermott 2026
Deskripsi Lowongan Kerja Quality Inspector Batam TerbaruJob Overview:
Perform field inspection of fitting and welding in accordance with project specification and scope as noted in the ITP. Review and familiarize with Project AFC drawing, NDT drawing, ITP, Work Instruction and Project specification relating to assigned project. Execute the inspection and Quality Control activities on site, collecting the relevant objectives proofs, ensuring monitoring and coordination of quality control activities on electrical and instrument equipment/system construction,
installation and mechanical completion activities. Conducting business & performing duties in accordance to McDermott’s " Code of Business Conduct" and any other
governing of the company.
Key Tasks and Responsibilities:
- Determine product conformity to customer specifications through daily surveillances and ITP inspection points in accordance with the Project Quality Plan
- Identify non-conformity for rectification and ensure final resolution
- Appraise product quality to determine conformity and non-conformity in accordance with the approved drawings and inspection & Test Plan; All inspection results need to be documented, and if non-conformity exists, documentation shall be raised to establish corrective action
- Coordinate interface with Operations, Certifying Authority, Client, Job Sharing personnel, and subcontractor, assuring the conformity to project specifications
- Exercise a proactive approach to the prevention of a problem by interacting with Production, Engineers, and Management personnel
- Liaise with customer representatives, ensuring product conformity and stage release for each activity denoted within the Project Quality Plan/ITP
- Executes the specific inspections on materials, equipment and construction/installation activities on site.
- Issues the relevant QAN-Quality Advise Note and, when necessary, writes and sends to QC Supervisor nonconformances
reports, update the corrective action progress by weekly basis.- Work with E&I Construction to rectify Client Site Issue, update the progress by weekly basis.
- Checks cable pulling, laying routing, bending radius, spacing between instrument cable, power cable (Low Voltage,
Medium Voltage, High Voltage), tie wrapping, physical damage, and cable identification, tagging, Marking,
numbering, etc as per spec, and AFC drawing, and cable schedule.- Check cable glanding, follow gland specification (universal Gland, or Barrier Gland, Brass gland or nickel-plated
gland, sizing, etc).- Witnessing wiring terminations, correct ferruling/cable lug types and sizing, relevant loop checks, based on AFCwiring,
layout drawing.- Witnessing cable cores Continuity Test, Insulation Test/Meagering.
- Work with preservation team to energize Motors/Generators, Space heaters, insulation test start from receiving until
handover to commissioning.- Advise Mechanical Completion Team to updates as built drawings (if necessary).
- Perform punch-listing operations while performing MC-ITR (Mechanical Completion-Inspection & Test Records).
- Checks power transformers, switchboard, accumulator battery, socket outlet, lighting system, Turbine Generators,
Compressors.- Performs visual inspections, dimensional test, checks rating and material for connection.
- Performs tests of continuity, insulation resistance for above ground cabling underground cabling.
- Witnessing Calibration of Safety valves, shutdown valve.
- Witnessing calibration of instruments.
- Checks installation of instruments, Wiring, lay out based on AFC-wiring, layout drawing.
- Work with Mechanical Completion team to performs test functional instruments.
- Checks pneumatically signal connection.
- Witnessing and check fiber optic cable testing, installation on platform.
- Witnessing and check fiber optic cable testing, installation intended for subsea cable.
- Witnessing and check testing of communication functionalities.
- Verify special processes and the relevant worker's qualifications.
- Witness the tests, controls and inspections carried out.
- Check conformity with the Quality Control Plan, obtain the relevant documentation, and check procedures and
equipment to be used in tests, controls and inspections, manage documents certifying test, controls and inspections.- Ensure the correct implementation of the approved inspection Test Plan.
- Ensure installation of Electrical Apparatus, instruments are complying with Hazardous Area Classification.
- Coordination, monitoring, reporting & technical assistance during fabrication & installation activities.
- Constant coordination with other engineering units, Process Engineer, and all relevant dept involved specially,
structure, piping department for relocation need.- Review E&I specifications versus implementation, review AFC-approved for Construction Drawing and advise
preparation of As-Builts drawing (if deem necessary).- Preparation of work method statement.
- QA/QC Inspection and documentation.
- Perform monitoring and inspection of the following installation:
- Support/Bracket/Stanchion for Cable trays, cable ladders, Switchgear (MCC-Motor Control Centre), Control Centre
(CCR-Central Control Room), transformers (Step Up & Step Down), Resistors (NGR-Neutral Ground Resistors),
Compressors, Turbine Generators, Diesel Generators, Ground resistance for electrical grounding system, Fire
alarm/protection system, PAGA, Smoke detector, gas detector, Flame Detector, Heat Detector, Manual Alarm Call
Point, Telecommunication facilities, conduit and fittings, lighting, fittings, control panel, telecommunication works,
Junction Box, Installation of control valve, safety valve, Pressure Valve, Level Valve, Flow Valve, Temperature Valve,
Pressure Transmitter, Level Transmitter, Flow Transmitter, Temperature Transmitter, Pressure Indicator, Level
Indicator, Flow Indicator, Temperature Indicator, Field Electrical/Instrument items, Impulse Piping, Tubing, Heat
Tracing, etc.- Constantly regular coordination with Client as well as commissioning team for any nonconformance found.
- Attend regular basis of E&I construction and Quality meeting with Client, and relevant Process Engineers.
- Qualified to perform inspection of Hazardous Area/Potentially Explosive Atmosphere - Certified by Comp 'Ex'
Hazardous Area Classifications.- Qualified to perform inspection of oil and gas Instrument -Certified by Indonesian MIGAS-oil & gas Industries
Instrument Inspector for Indonesian projects.- High standard of safe working practice, quality and productivity as well as compliance with the code of business
conduct.
Essential Qualifications and Education:
- High school diploma or degree in relevant field of study
- 5+ years of Quality Control or discipline-related experience with a degree and 8+ with a diploma
- Proficient in the use of computer and Microsoft programs
#LI-DL1
Tata Cara Pendaftaran :
Bagi yang berminat, segera lakukan pendaftaran dengan mengunjungi link di bawah :
Keterangan :
- Hanya pelamar terbaik lah yang akan ditelepon untuk mengikuti tahap penerimaan lebih lanjut.
- Lowongan McDermott ini tidak dipungut biaya sama sekali.
Apabila Kalian belum tertarik dengan Rekrutmen Quality Inspector Batam Maret 2026 McDermott di atas, maka Anda dapat mencoba mencari info rekrutmen yang sejenis dari beberapa perusahaan di Batam di bawah ini.
Related Jobs:
Lowongan Kerja Revenue Analyst
Additional Information Job Number 26026350 Job Category Revenue Management Location Four Points by Sheraton Batam, Komplek Panorama Nagoya Sungai Jodoh Batu Ampar, Batam, Riau Islands,
Lowongan Kerja Analyst-Revenue Management
Additional Information Job Number 26026350 Job Category Revenue Management Location Four Points by Sheraton Batam, Komplek Panorama Nagoya Sungai Jodoh Batu Ampar, Batam, Riau Islands,
Lowongan Kerja Quality Inspector
Job Overview: Perform field inspection of fitting and welding in accordance with project specification and scope as noted in the ITP. Review and familiarize with
Lowongan Kerja Electrical Engineer
Overview: For over 35 years, OSI Electronics has provided Manufacturing Solutions of the highest quality, reliability, and customer support. We specialize in customized Manufacturing Solutions
Lowongan Kerja NDT Tech
Job Overview: Perform examination of welds / material by Ultrasonic (UT), Magnetic Testing (MT), Dye Penetrant (PT) and Eddy Current (ET) based upon code and